The main part of each pot / tank of the saccharification system is made of 304 stainless steel of international standard. All parts of the main body of the pot / tank that contact with materials such as wheat mash are treated by mirror polishing, and the external part is treated by grinding and polishing,

A. the equipment is made of copper or stainless steel, which is gorgeous and elegant.

B. It can brew various beer drinks such as black beer, yellow beer, red beer, fruit beer and gevas.

C. simple and flexible operation, low power consumption and small floor area.

D. the production environment is clean, pollution-free, and the wine is fragrant.

E. high degree of automation, even non brewing professionals can brew superior beer.

After beer fermentation is mature, it is necessary to filter and remove the yeast and other turbid substances in the fermentation liquor to make the liquor clear and bright. After the fermentation liquor is filtered, it is called "sake". The bright tank is used to hold sake by the packaging department. The structure is a cylinder with a conical bottom, usually made of stainless steel, with polyurethane insulation outside, and the temperature control is realized by the refrigerant (usually alcohol water) in the jacket around the tank.

Distillery Equipment is designed and built for distillery usage. which can achieve about 96% A.B.V. to produce neutral spirit and Vodka easily.can also use it to produce low degree A.B.V.. such as gin, whiskey,brandy, rum etc.

Brandy distiller equipment adopts the thermal concentration method  Its heating temperature and time can be set manually or automatically. The liquor head, liquor middle and liquor tail can be separated according to the requirements. 

Heating model can be heat by electrical or steam .

Vodka Distiller distill the alcohol from the wheat ,barly etc fermented wort solution which can get high degree pure wiskey liquor .

alcohol solution is first preheated through the pipeline in the distiller, which also has the effect of enhancing reflux. The heated solution then enters the top of the separator and runs down the distiller to meet the rising steam. Volatile substances arrive at the Distiller in the form of steam, and liquid waste flows out from the bottom of the separator.

Alcohol solution is first preheated through the pipeline in the distiller, which also has the effect of enhancing reflux. The heated solution then enters the top of the separator and runs down the distiller to meet the rising steam. Volatile substances arrive at the Distiller in the form of steam, and liquid waste flows out from the bottom of the separator.

Red copper has a good resistance to the acid in wine. In the process of heating, copper forms insoluble copper salt with butyric acid, caproic acid, caprylic acid, solanoic acid, Yuedu acid, etc., so as to remove the acid with bad flavor and improve the quality of brandy. The distiller made of glass or stainless steel can not achieve the same effect. In addition, red copper has good thermal conductivity and is the catalyst of some esterification reactions.

Red copper has good resistance to acid in wine, in the heating process, copper and butyric acid, caproic acid, caprylic acid, caproic acid, mallow acid, acid and other forms of insoluble copper salt, so as to remove the acid with bad flavor, can improve the quality of brandy.

Vodka is a distilled, highly refined product, which is usually distilled in a tower (reflux), but can also be distilled in a pot. Tower distillation can get more pure wine, because they are essentially re distilled once, so it is not necessary to use activated carbon filter (activated carbon) for further purification.  Can distillation is a crude product containing flavor and fragrance substances, which need to be removed by activated carbon filter and / or additional redistillation treatment

Alcohol solution is first preheated through the pipeline in the distiller, which also has the effect of enhancing reflux. The heated solution then enters the top of the separator and runs down the distiller to meet the rising steam. Volatile substances arrive at the Distiller in the form of steam, and liquid waste flows out from the bottom of the separator.

The whole pot body is made of copper, which has several purposes: first, copper has good thermal conductivity; second, copper is some esterification catalyst; third, copper has good resistance to the acidity of raw wine; fourth, copper can precipitate insoluble copper salts such as butyric acid, acetic acid, capric acid and lauric acid, so that these bad smelling acids can be removed.