We can supply you with the full set solutions of the engineering,equipment and technical service in pharmaceutical and food industry after years of specific experience in pharmaceutical industry and food industry, engineering research and technical service.

Stainless Steel Preparation Tank

Suitable for

Infusion solution ,injection solution ,eye drop solution ,syrup solution ,oral liquid,vaccine etc

Volume capacity 

50L-10000L

Jacket heating medium

Steam,electrical ,thermal oil ,hot water 

Jacket cooling medium

Chiller ,cooling water ,tap water 


Mixer type :

Propeller agitator ,high shear agitator ,scraper agitator,achor agitator etc.

Control system :

PLC automatic control,button type control

Fittings in the tank 

Manhole ,vent filter ,level senosr ,PH sensor ,conductivity meter ,temperature sensor ,pressure sensor ,safety valve,sampling valve.


Warranty: 1-Year

What is Solution Preparation Mixing Tank

Solution preparation Mixing Tank is used to mix one or several materials together according to the technological proportions. Which can fit pharmaceutical and food industrial GMP requirement . Solution preparation Mixing Tank is one kind of liquid preparation equipment,it is required for the deployment of the material dissolved in the solution of the quantitative,reach a certain concentration or content,and the bleaching & filtering process to obtain solution for other proceed,it is in the pharmaceutical industry as syrup solution,water injection,infusion solution,lyophilized powder etc.

Top mounted agitator type Solution Preparation Mixing Tank Advantages

1) Volume we can produce from 20L ---20000L.

2) Material we can use SS304 and SS316L. etc.

3) it can used in single layer or double jacket layers. 

4) Jacket can be used different type : single full jacket ,limpet coil jacket and dimple type jacket.

5) Jacket can be used for heating and cooling .

6) top mounted agitator : propeller type ,anchor type ,high shear emulsify type and scraper type etc.

7) Insulation material can use mineral wool ,rock wool ,PUF etc.

8) Tank can be equipped with manhole ,CIP spray ball ,vent filter level sensor ,temperature sensor ,pressure sensor ,load cell ,PH sensor ,PO2 sensor ,safety valve,sampling valve etc.

9) Tank can be CIP/SIP online.

10) control panel :PLC /HMI automatic control or common button control .

11) inside shell mirror polish Ra<0.4um ,outside shell polish Ra<0.8um.