Single effect concentrator is suitable for the evaporator the water or solvent from solution such as traditional herbal medicine, western medicine, glucose, wine- making, starch, oral liquid, chemical industry, food, natural flavor, food additives, monosodium glutamate, dairy products, etc.the outlet ointment density is about 1.2g/cm3， also can be used to recovery the solvent ,like methanol, ethanol etc.

Double effect concentrator not only saves energy and protects the environment, but also has the advantages of low evaporation temperature and high evaporation intensity.

Double effect concentrator adopts double effect evaporation at the same time. The full utilization of the secondary steam not only saves the investment of the boiler, but also saves the energy consumption. Compared with the single effect concentrator, the energy consumption is reduced by 50%.

The scraper concentrator can be used for distillation and recovery of organic concentration medium, as well as for evaporation and concentration of high concentration feed solution, with a significant concentration ratio of more than 1.4. Due to the vacuum decompression concentration, the concentration time is short, and the effective components of the heat sensitive materials will not be damaged.

The concentrator tank is of jacketed structure, the condenser is of tubular type, the separator is of baffled separation type, and the cooler is of serpentine type. Vacuum distillation, in order to reduce the pressure of liquid surface and make the boiling point of liquid material correspondingly lower, because liquid distillation is carried out fastest at the boiling point, so the vacuum degree is adjusted by the user according to the heat sensitivity of liquid material.

PLC automatic control Vacuum Hot water circulation heating type low temperature single effect evaporator machine  is suitable for the evaporator the water or solvent from solution such as traditional herbal medicine, western medicine, glucose, wine- making, starch, oral liquid, chemical industry, food, natural flavor, food additives, monosodium glutamate, dairy products etc field which are the temperature sensitive ,cannot use the steam directly heating.

Short path molecular distillation (short-path distillation) is a new separation technique that addresses the problems that conventional distillation techniques cannot solve. It can achieve "liquid-liquid" separation at very low vacuum according to the mean free path difference of molecular motion under the temperature of much lower than the liquid boiling point; Mainly the use of scraper system forcing liquid film evaporation or distillation of a highly efficient evaporation, distillation equipment, deodorization, degassing reaction and supporting heating, cooling and other unit operations

The rising film evaporator preheats the feed liquid to the boiling point, adds it from the bottom of the heating chamber and vaporizes strongly in the heating pipe, so that the generated steam drives the feed liquid to rise in a film shape along the pipe wall. The liquid film continues to evaporate in the rising process. The solution only needs to pass through the heating tube once to reach the required concentration. This evaporator is suitable for dilute solutions and heat sensitive materials with low concentration.

Falling Film Evaporator  is widely used in pharmaceutical, food, chemical, biological engineering, environmental protection engineering, waste liquid recovery and other industries. If it is applied in food, it can continuously evaporate and concentrate the thermosensitive materials such as glucose, fructose, fresh milk, tomato juice, soybean milk, xylitol, sorbitol, VC, starch sugar, Chinese medicine extract and so on, so as to improve the product concentration. In the aspect of wastewater treatment, industrial wastewater can be evaporated to achieve the purpose of wastewater recovery or discharge.

1. The results show that the heat transfer coefficient is high, the evaporation capacity is large, the evaporation intensity can reach 200 kg / m2 · HR, and the thermal efficiency is high.

2. The heating time of the material is short, about 5 seconds to 10 seconds, and it works in vacuum, which is more beneficial to the heat sensitive material, and keeps all kinds of components from any decomposition, so as to ensure the product quality.

3. It can adapt to a wide range of viscosity changes. High and low viscosity materials can be treated, and the viscosity of materials can be as high as 100000 centipoise (CP).

1. Plug and play, no additional steam and cooling water is required.

2. Compared with traditional evaporation technology, heat pump evaporation technology can save more than 90% in energy consumption.

3. Ultra-low temperature evaporation. The vacuum degree is above -0.095Mpa, the evaporation temperature is 35-40 ºC. More suitable for heat-sensitive effluent. For corrosive effluent, the degree of corrosion of the equipment is minimized, and the life of the equipment is greatly extended compared to traditional evaporators.

Solution for the treatment and disposal of highly difficult waste liquids composed of high COD, high salt, and high corrosive substances

Liquid supply engineering: The liquid supply pump lifts the raw liquid from the temporary storage tank to the measuring tank inside the equipment. After the vacuum pressure inside the equipment reaches the set value, it is sucked into the distillation kettle to complete the measurement and liquid feeding.

Distillation engineering: The equipment turns on the heat source (steam, heat pump, electromagnetic) to distill the water in the raw water in an environment with a reduced pressure of -80~90kPa and a boiling point of 45~55 ℃. The water is condensed into relatively clean recovered water through a condenser, and the scraper on the stirring shaft scrapes off the solid matter on the inner wall of the distillation kettle to prevent scaling.

Discharge project: The automatic control system detects and judges the residue status inside the distillation kettle, and enters the discharge project when it reaches the set value. The scraper on the mixing shaft rotates to discharge the residue.

due to the different solvent boling temperature is difference , so the  low boiling temperature solvent will be distilled and evaporate from the mother liquid firstly ,and the evaporated solvent will be condensate by condenser and collection in the collection tank  .as this principle ,so this equipment also will be used for the solvent recovery and solvent purify purpose .

This machine is suitable for dilute alcohol recovery in pharmaceutical,food, light industry, chemical industry and other industries. It is also suitable for distillation of methanol and other coal-soluble products.

The three-way concentrator is connected with the lower stage heater through the straight pipe at the bottom of the steam chamber and the steam chamber with the same top plate of the inner diaphragm of the primary and secondary effect separators, which is a secondary or tertiary steam pipe. The steam enters the steam chamber from the top plate of the separator and enters the next stage heater.

Falling film concentrator is widely used in pharmaceutical, food, chemical, biological engineering and other fields. Environmental protection engineering, waste liquid recovery and other industries. If applied to food, it can continuously evaporation and concentration glucose, fructose, fresh milk, tomato juice, soybean milk, xylitol, sorbitol, starch sugar, traditional Chinese medicine extract and other heat-sensitive substances to improve the product concentration. In the aspect of waste water treatment, industrial waste water can be evaporated to achieve the purpose of waste water recovery or discharge.